The QuickGrip Paddle Clip will fit most kayak tracks including Ascend, Wilderness Systems, Native Watercraft, YakGear and Yak Attack.

Easy to fit and will fit most standard paddle shafts.

The SwivelPort is designed to allow accessories to be easily rotated 360°.

Factory set friction joint. Can be attached to any StarPort, SidePort, RIBPort or RailMount and will receive any RAILBLAZA accessory.

This is the little brother to the Rod Holder II. Designed to hold fishing rods with spinning, baitcaster or fly reels.

The Rod Holder R is a light duty rod holder suitable for fresh water and inshore fishing, not trolling for large fish. It will fit into any RAILBLAZA mounting port. The stretchable strap at the front of the holder will wrap around the top for baitcaster and fly reels and round the bottom for spinning reels, keeping your rod and reel safe.

Moulded in rugged fibreglass reinforced plastic, with stainless steel fasteners, it will fit any vessel.

When finished fishing for the day, remove from StarPort and stow in dry place, do not store wet.

Waterproof and UV resistance nylon.

Good storage cover for small size watercraft.

The Drink Hold from RAILBLAZA is a convenient, easily attachable drink holding accessory for keeping your drink always within arms reach on the water.

The only thing better than a cold drink on a hot day (or vice versa), is having one within easy reach while on your boat, PWC or kayak any time you want it. The Drink Hold from RAILBLAZA is a convenient, easily attachable drink holding accessory for keeping your drink always within arms reach on the water. Made in New Zealand from high quality, UV proof plastic. Fit to boats, inflatables, kayaks, bass boat, yachts there’s no limit where these can be used

Made in New Zealand from high quality, UV proof plastic

Fit to boats, inflatables, kayaks, fibreglass or even put it in a sheet winch!

Fits any RAILBLAZA port, easily removed and stowed when not in use

Holds bottles, coffee mugs & glasses

The Drink Hold from RAILBLAZA is the convenient accessory to hold your cup, coffee mug, drink can or drink bottle securely. Being a RAILBLAZA product, the Drink Hold can do more than keep your beverage safe while you reel in a monster kingfish or read a chart. This universal marine cup holder is also perfect for hanging fishing lures or storing tools such as pliers

Along with allowing you to easily move your drink to the most convenient location on your vessel, this versatile cup holder also offers the ability to be easily mounted onto a vertical or horizontal RAILBLAZA StarPort and will hold anything from drink bottles to coffee mugs. Like all RAILBLAZA StarPort accessories, the Drink Hold can be easily removed and transferred to another port or stowed away when not in use. Super easy!

If you’re looking for a drink or cup holder for your kayak, boat, canoe (or any other kind of marine vessel), then look no further than the RAILBLAZA Drink Hold.

The CupClam drink holder can be mounted in either horizontally or vertically-mounted StarPorts, to hold mugs, stubbies, wine glasses, even wine bottles. To work out which RAILBLAZA mounting base is best for you, please click this link to our mounting bases page.

If you can’t hold your drink, the RAILBLAZA CupClam will.

Need a flat surface that flexes with your setup? The RAILBLAZA Adjustable Platform is your do-it-all mounting base for electronics, cameras, trays, or anything else that needs a stable spot on board. With a tilting head and full 360° rotation, this platform makes it easy to find the perfect viewing or working angle—then lock it down with a twist. Mount a fish finder one day, a cutting board the next—it’s that versatile. Built tough from marine-grade materials, it holds steady through wake, chop, and sun-soaked abuse. Compatible with all RAILBLAZA StarPort bases, it installs in seconds and adapts to whatever rig you’re running. Clean deck, locked angle, no drill drama.

• Makes DIY projects StarPort compatible
• Fits any StarPort Mount
• 180-degree tilt adjustment

Your phone isn’t just a tool—it’s your navigational system, your sonar screen, your SOS beacon. That’s why the Anchorpoint Phone Mount locks it in tighter than a gator’s jaw. Its precision-machined aluminum body resist corrosion and abuse, while the five‑point silicone‑lined vice clamp grips your device like it owes you money. A four‑point vibration‑dampening suspension softens brutal terrain or chop so your video stays smooth, your screen stays readable. Dial in any angle you want using the full 360° locking arm, then snap into any RAILBLAZA StarPort mount and go wherever adventure leads. With quick‑release action and universal fit for phones and rugged cases, the Anchorpoint keeps your lifeline anchored even when chaos hits.

• Hold your phone firmly on the wave
• Fits any StarPort Mount
• 180-degree tilt adjustment

Some flags are just for show. This one means you’re on the move, and you’d rather not get run over. The RAILBLAZA Flag Pole is a lightweight, two-piece pole built to raise visibility and awareness wherever you ride—kayak, SUP, canoe, or jon boat. It plugs straight into any RAILBLAZA StarPort and breaks down fast for easy storage when you’re off the water. Whether you’re flying a dive flag, safety flag, or just repping your style, the Flag Pole stands tall (1.2 meters to be exact), locks in firm, and resists the flex and flop of cheaper builds. Made from UV-stable plastic with corrosion-resistant hardware, it’s tough enough for open water and clean enough for flatwater finesse. Add a flag and you’re mission-ready. Because being seen is being smart—and staying safe never looked this good

• Can be securely fastened to any common top-handle sailboat winch
• Can be installed into a StarPort
• Can easily be removed, transported and refixed at another location

Stop drilling holes and start docking like a pro. The RAILBLAZA TracLoader 45 StarPort is your fast-track to gear mounting greatness—no tools, no hassle, no regrets. Designed to slide into 45-degree gunnel tracks on select Tracker, Ranger, Lowe, and Crestliner boats, this base locks down your RAILBLAZA accessories without so much as scratching your paint. Whether it’s a rod holder, drink caddy, or GoPro mount, you’re ready to rig in seconds and reposition just as fast. Built tough from high-grade polymers and marine-grade hardware, this StarPort doesn’t flinch in the face of salt, sun, or the chaos of a hot bite. It installs in seconds, holds like hell, and looks sharp doing it. So go ahead— tighten it, switch it, and sail into organized bliss. Because you’ve got more important things to worry about, like what lure to tie on next.

• Super strong made from high quality, UV stabilised, fibreglass reinforced polymers
• Tool-free, simple installation - no drilling required
• Holds any RAILBLAZA accessory using the StarPort mounting system

The RAILBLAZA TracLoader 45 CleatPort is your fast-track answer to limited space and overloaded rails. This clever hybrid mounts at a 45-degree angle, delivering both a heavy-duty cleat and a fully functional StarPort base—all without drilling a single hole. Snap it into your boat’s track system and instantly gain a 4″ tie-off point for dock lines, anchor ropes, or bumpers, while also unlocking full access to RAILBLAZA accessories like rod holders, drink trays, lights, or camera booms. It’s built from UV-stabilized, marine-grade polymers and stainless hardware, so it takes abuse and dishes it right back. Perfect for pontoons, bass boats, and aluminum rigs with limited rail space, the TracLoader 45 CleatPort gets more done in one mount than most systems do in three. When you’re tight on room but big on needs, this mount doesn’t just fit—it earns its keep.

• Secure your fishing rod, mobile phone, drink and more while you boat
• Easy installation - no tools necessary
• Perfect for Lund Boats, Lowe Boats, Excel Boats, Express Boats and early model Crestliner boats
• Adds extra functionality to your boat with the addition of any RAILBLAZA accessory

You can attach RAILBLAZA adaptors to anything you like to make them StarPort compatible, or bolt the 2 adaptors together to make a male to male fitting.

The male to male fitting has been used to create a detachable system for tubes on kayak sailor kits and outriggers. It has many other applications, enhancing the versatility of the RAILBLAZA StarPort system.

StarPort Adaptors are supplied in pairs, with stainless steel mounting screws.

The Spooling Station is an easy, compact, one-person solution to effortlessly re-spool your fishing reel. The fishing line Spooling Station Track Mount version is a device that is designed to help you re-spool your line on the go in the boat or kayak where vertical tracks are present.

The Spooling Station has fully adjustable width and height to suit a wide range of spools. The integrated brake adds force to the spool to reduce the risk of major knots in the line. The pivoting base allows the Spooling Station to move freely and follow the movement at the tip of the rod.

RAILBLAZA Spooling Station Track Mount option allows a tool-free installation on gunnel tracks of most aluminium fishing boats including Tracker VersaTrack, Crestliner, LUND Sport Trak, LOWE Boats, Princecraft PrinceTrak, Xpress Boats, War Eagle, EXCEL Boats, G3, Ranger, Horizon & Stessl Boats Australia (2020 onwards). You can also use this version with our TracLoader Gunnel Track when mounted on a vertical surface.

If you want to install the Spooling Station in your garage or utilize a StarPort mount then please check out the Spooling Station Fixed.

RailMount 19-25 Pair White - No Starport that attaches and securely holds RAILBLAZA accessories.

The RAILBLAZA RailMount 19-25 is a base mount that allows the secure and easy attachment of any RAILBLAZA accessories to your rails. The RailMount can be fitted to round boat rails, as well as to kayaks and other marine equipment.

This marine rail mount is ideal for those who need to utilise it for holding different accessories, or those wanting to change the location of their Rod Holder II, Fillet Table, or GPS Three Axis Platform. The RailMount is simply screwed together with no drilling required so that it can be easily moved to a different spot, leaving your rail as good as new!

The RailMount 19-25 can be clamped to any 19 or 25mm (0.75 or 1”) rail with ease, meaning more time can be spent on the important things such as fishing and diving instead of on your rail fittings. All installation hardware is provided including; adapters, rubber grips, self-adhesive grip tape, and the required stainless steel mounting screws.

IMPORTANT: Use of petroleum based lubricants on the StarPort slide will cause failure. Silicone based products are best suited (please check contents of lubricant before using).

RAILBLAZA HEXX™ Fish Finder Mount is a solid, lightweight, removable and elegant composite mount for fish finders up to 3kgs (6.6lbs).

Suitable for Fish finders up to 12” from all your favorite brands including Humminbird, Lowrance, Garmin and more.

HEXX base mount design with 90° base rotation, 90° platform rotation & 180° tilt range.

These 3 axes of adjustment allow a solution for the most complex fish finder mounting locations on your boat like consoles and bow mount solutions.

A must have for all kayaks and canoes.

Easy to install, only requires a screwdriver.

Complete set, no need to buy anything else.

Stay at your favorite fishing spot.