A platform for mounting fish finders or chart plotters with U shaped brackets, making them easily removable. All that remains on the deck once it's removed is a low profile RAILBLAZA mount.

This 3 axis mount has friction joints top and bottom featuring R-Lock lockable joints (pat pending). The centre joint is fully adjustable in 15-degree increments. Will take fish finders up to 1.5kgs (3.3 lb). Mount on an angled surfaces and have your display level!

Also with the correct RAILBLAZA mount, you can mount your fish finder on a rail, or inflatable tube!

Fits most fish finder brands. You may need to drill holes to fit some sounders;

This is the little brother to the Rod Holder II. Designed to hold fishing rods with spinning, baitcaster or fly reels.

The Rod Holder R is a light duty rod holder suitable for fresh water and inshore fishing, not trolling for large fish. It will fit into any RAILBLAZA mounting port. The stretchable strap at the front of the holder will wrap around the top for baitcaster and fly reels and round the bottom for spinning reels, keeping your rod and reel safe.

Moulded in rugged fibreglass reinforced plastic, with stainless steel fasteners, it will fit any vessel.

You can buy it as a kit with the very popular StarPort HD, allowing it to fit the footprint of many other popular mounts on the market, or by itself so you can use any other RAILBLAZA mounting port. To work out which mounting base is best for you, please click this link to our mounting bases page.

When finished fishing for the day, remove from StarPort and stow in dry place, do not store wet.

The Sounder & Transducer Mount Kit has been developed for kayak anglers needing an easy way to install and remove fish finders or sounders. With this kit you can install and uninstall your fishfinder or sounder in a matter of seconds, no messy adhesives or excessive drilling of fittings required. With our extensive selection of mounts this kit can be adapted to fit any kayak or canoe.

The transducer mount kit offers a unique advantage for kayaks or canoes that do not have a transducer scupper, now the transducer will be in the water giving a 100% true reading, rather than reading through the hull. If you need to get the transducer deeper in the water simply add an extension, if you’re entering shallow water the factory set friction joints will allow you to lift the transducer out of harm’s way.

The Kit can be completely removed with one click of the StarPort slide lock, protecting your sounder when in transport, when using the kayak for other activities or when you need to transfer the sounder to another kayak or canoe.

RailMount 32-41 boat rail and Hobie kayak mount that attaches and securely holds RAILBLAZA accessories.

This marine rail mount from RAILBLAZA allows for the easy attachment of accessories such as rod holders and GPS stands to your boat rails, Hobie kayaks, and dinghies. Simple to mount and remove without damage to railings.

The RAILBLAZA RailMount 32-41 is a base mount that allows the secure and easy attachment of any RAILBLAZA accessories to your rails. The RailMount can be fitted to both round and square boat rails, with the 32-41 being specifically designed to fit the Aka rails and H-Rails on Hobie kayaks.

This marine rail mount is ideal for those who need to utilise it for holding different accessories, or those wanting to change the location of their Rod Holder II, Fillet Table, or GPS Three Axis Platform. The RailMount is simply screwed together with no drilling required so that it can be easily moved to a different spot, leaving your rail as good as new!

The RailMount 32-41 can be clamped to both round AND square 32 mm (1.25 in) rails, and to 41mm (1 5/8″) round rails , including rails on the Hobie kayak outriggers and the multi-sided Hobie H-rails. This means more time can be spent on the important things such as fishing, diving, and kayaking, instead of on your rail fittings. All installation hardware is provided including; adapters, rubber grips, self-adhesive grip tape, and the required stainless steel mounting screws.

IMPORTANT: Use of petroleum based lubricants on the StarPort slide will cause failure. Silicone based products are best suited (please check contents of lubricant before using).

This heavy-duty kayak display and storage rack is designed to safely store and showcase multiple kayaks while keeping your space organised. Built with a strong steel frame and padded support arms, it protects your kayaks from scratches while providing excellent stability.

The rack features four padded storage arms, allowing you to store up to 4 kayaks or paddleboards at the same time. Its adjustable width (129–170 cm) makes it suitable for different kayak sizes, while the 146 cm height provides efficient vertical storage to maximise space.

Equipped with smooth-rolling caster wheels, the rack can be easily moved around your garage, showroom, rental shop, or storage area. The durable powder-coated steel construction ensures long-lasting performance for both indoor and outdoor use.

• Stores up to 4 kayaks, canoes, or paddleboards
• Heavy-duty steel construction
• Protective foam padded arms to prevent scratches
• Mobile design with caster wheels for easy movement
• Ideal for shops, warehouses, rental centres, and home garages

The Sounder & Transducer Mount Kit has been developed for kayak anglers needing an easy way to install and remove fish finders or sounders. With this kit you can install and uninstall your fishfinder or sounder in a matter of seconds, no messy adhesives or excessive drilling of fittings required. With our extensive selection of mounts this kit can be adapted to fit any kayak or canoe.

The transducer mount kit offers a unique advantage for kayaks or canoes that do not have a transducer scupper, now the transducer will be in the water giving a 100% true reading, rather than reading through the hull. If you need to get the transducer deeper in the water simply add an extension, if you're entering shallow water the factory set friction joints will allow you to lift the transducer out of harm’s way.

The Kit can be completely removed with one click of the StarPort slide lock, protecting your sounder when in transport, when using the kayak for other activities or when you need to transfer the sounder to another kayak or canoe.

The RAILBLAZA Mobile Device Holder, or “Mobi” for short, is ready to look after your phone, GPS, VHF, EPIRB or other mobile device.

Our unique design brings a new level of versatility to the device holder market, once you have your Mobi you can attach it to any vessel or vehicle on water or land – basically any place you can install a RAILBLAZA StarPort, RIBPort or RailMount.

The spring loaded arms are sufficient for most applications, with neoprene rubber pads to give high gripping power. For extra peace of mind the adjustable, UV stabilised, Eurethane rubber retaining strap ensures your device goes nowhere, even in the most rugged environment.

Want a tool-free and centrally mounted lockable mount on your kayak track?

StarPort HD can achieve this with the addition of the StarPort HD TracMount Kit.

Simply follow the instructions enclosed, or view our installation video by clicking below.

Please Note: This kit is for use with StarPort HD only, to trackmount a StarPort please use the StarPort TracMount Kit. The spacer washers included will only be required on some tracks. They are to be used between the Hex Knob and the StarPort HD to stop the screw bottoming out in the track.

The robust and lightweight Extenda Pole 1000 is the most versatile light, flag and camera mounting pole you can buy. It disassembles to a short length for easy storage (350mm or 14″), and has great corrosion and UV resistance. You can extend it by adding extra 300mm long extender pieces which can be purchased separately.

The base of the pole clips into any of the many RAILBLAZA StarPort mounts, and the top will hold any RAILBLAZA accessory. Also featuring an eye to hold a flag, and tie down hooks on each section. Supplied complete with a velcro strap to keep the parts together when not in use.

Extenda Pole is perfect for holding lights, cameras, flags and torches.

Secure support for electric trolling motor shafts while travelling either on the water or on the trailer. Avoid damage to your electric trolling motor by adding this useful RAILBLAZA accessory to your boat.

The G-Hold 50 with flexible quick-release strap will secure the shaft of your Minnkota, Motorguide, Watersnake, Lowrance Ghost, Garmin Force and many other trolling motor brands.

Designed and made in New Zealand using high quality materials, and the latest LED technology

3 operation modes: Full brightness navigation mode 2NM – up to 25hrs battery life; Low brightness work mode – up to 160 hrs battery life; Flashing emergency Mode – over 200hrs battery life

Waterproof to 1 metre

Light floats without pole attached

Powered by 3 x AA batteries, not supplied

Meets USCG 2NM 33 CFR 183.810 & ABYC A-16

Independently tested by Imanna Labs Inc, Florida

Fits any RAILBLAZA mounting port, ordered separately.

The i360 meets the required standards for an all-round white navigation light for power and sailboats under 12 metres, and kayaks & canoes. It is also perfect as an anchor light.

Made in New Zealand; Latest circuit design; Battery life from 25 to 200 hours; Please see link below for more information regarding navigation light requirements.

With circuit board manufacture, plastic moulding and assembly all done in New Zealand, this is a quality unit, at an affordable price.

To maximise battery life we have used a high quality, Japanese made, Nichia power LED and a high efficiency digital circuit. It is lightweight, and IP67 rated for dust and water ingress, meaning it will float with the lens right up out of the water. AA batteries mean many more light hours for your dollars when compared to AAA, and as it’s battery powered there’s no need for external wiring and switching.

The i360 is Compatible with any RAILBLAZA StarPort, SidePort, RIBPort or RailMount, so can be mounted just about anywhere. To work out which mounting base is best for you, please click this link to our mounting bases page.

A fish finder mount allowing Lowrance HOOK2 4x and 5x models to become StarPort compatible, easy to tilt and remove. Simply replace the supplied Lowrance mount with the Hook 2 Adaptor to allow single handed display tilting, all that remains on the deck once it's removed is a low profile RAILBLAZA mount.

This 3 axis mount has friction joints top and bottom featuring R-Lock lockable joints (pat pending). The centre joint is fully adjustable in 15-degree increments. Will take fish finders up to 1.5kgs (3.3 lb). Mount on an angled surfaces and have your display level!

A platform for mounting fish finders or chart plotters with square or round bases, making them easily removable. All that remains on the deck once it's removed is a low profile RAILBLAZA mount.

This 3 axis mount has friction joints top and bottom featuring R-Lock lockable joints (pat pending). The centre joint is fully adjustable in 15-degree increments. Will take fish finders up to 1.5kgs (3.3 lb). Mount on an angled surfaces and have your display level!

Also with the correct RAILBLAZA mount, you can mount your fish finder on a rail, or inflatable tube!

Fits most fish finder brands. You may need to drill holes to fit some sounders;

Fishing rod holder for boats & kayaks that is easy to mount and keeps your rod elevated

The Rod Tube from RAILBLAZA has been designed to answer a lot of requests from customers who were wanting a simple fishing rod holder for boats and kayaks, while keeping their reels elevated and clear of waves and splash.

If you are wanting one of the best rod holders on the market, look no further. The Rod Tube is simple to mount to the side or other locations on your boat or kayak by using any StarPort. It is also quick and easy to reposition if you are wanting a different angle, and can be rotated 360 degrees. The RAILBLAZA innovative drop-down gimbal also allows you to keep your fishing pole high and dry, otherwise you can open the gimbal, and push your fishing rod all the way into the end of the tube.

Super strong made from high quality, UV stabilized, fiberglass reinforced polymers

Tool-free, simple installation, no drilling required

Holds any RAILBLAZA accessory using the StarPort mounting system

The RAILBLAZA Pontoon Boat RailMount 28-32mm is a base mount that allows the secure and easy attachment of any RAILBLAZA accessory to your Pontoon Boat rails.

Feature

Rubber inserts avoid slippage when attached to rails

StarPort locking slide secures accessories in place

UV stabilised plastic

Unique design avoids interference with rail wall

Construction Materials

RailMount – UV stabilized fiberglass reinforced plastic

StarPort – UV stabilized AES plastic

Inserts – Rubber

Locking Slide – UV stabilized PC plastic

Stainless steel fasteners

This, battery powered, port/starboard navigation light outshines all others! The iPS meets the required standards for a port/starboard navigation light for power and sailboats under 12 metres.

This bow light is great for use where cables can’t be run such as on some inflatables, as an emergency nav light, or on small, tiller steered vessels.

RAILBLAZA have made a bi-colour, or port/starboard light, and not a tri-colour for a very good reason, as this product is for power boats under 12 metres in length.

With circuit board manufacture, plastic moulding and assembly all done in New Zealand, this is a stylish and quality unit, at an affordable price. Like all RAILBLAZA products, this bow light has been designed and tested in the harsh sunlight and salt water environment of New Zealand’s oceans, meaning it will give many years of fault free service, and still look great.

To maximise battery life, RAILBLAZA have used high quality, Osram power LEDs and a high efficiency digital circuit. It is lightweight, and IP67 rated for dust and water ingress, these features mean it will float with the lens right up out of the water and being battery powered it’s very simple to install, no external wiring and switching. The iPS bow light is Compatible with any RAILBLAZA StarPort, SidePort, RIBPort or RailMount, so can be mounted just about anywhere.

Features

Designed and made in New Zealand using high quality materials, and the latest LED technology

3 operation modes; – Bi-colour Port/StarBoard mode 2NM – up to 14hrs battery life – Port light only mode 2NM – up to 28 hrs battery life – Starboard light only mode 2NM – up to 28 hrs battery life

Waterproof to 1 metre

Floats with lens clear of water

Powered by 3 x AA batteries, not supplied

Meets USCG 2NM 33 CFR 183.810 & ABYC A-16

Fits any RAILBLAZA mounting port, ordered separately.Made in New Zealand

Battery powered - no wires required

Meets USCG 2NM standards

The TracPort Dash 350 turns one StarPort into three. Supplied with the StarPort Bridge Support for added rigidity, it will lock into place on your StarPort firmly, and increase your work space. StarPorts can be loosened and slid along the track to the correct position.

Once it’s set up, simply clip your RAILBLAZA accessories in and out, then remove the system when you’re finished for security, transport or storage!

Supplied with 2 StarPort adaptors, in case you want to use 2 StarPorts (sold separately) for a super rigid installation.

Coming from the legacy of our Big River dry bags, we shaped a dry bag expressly for use on stand-up paddle board decks. To fasten these bags to your deck we use carefully formulated TPU patches and the most trustworthy adhesive on the market - 3M VHB for maximum adhesion in whatever conditions you can throw at it. There’s also no reason to limit yourself to SUPs - this bag is equally useful on all manner of kayaks, boats and rafts.

• Hypalon roll top closure
• 3M Self Adhesive Lash Points
• Aluminium hook ladderlock buckles
• 420D Big River fabric

The RAILBLAZA Mobile Device Holder, or “Mobi” for short, is ready to look after your phone, GPS, VHF, EPIRB or other mobile device.

Our unique design brings a new level of versatility to the device holder market, once you have your Mobi you can attach it to any vessel or vehicle on water or land – basically any place you can install a RAILBLAZA StarPort, RIBPort or RailMount.

The spring loaded arms are sufficient for most applications, with neoprene rubber pads to give high gripping power. For extra peace of mind the adjustable, UV stabilised, Eurethane rubber retaining strap ensures your device goes nowhere, even in the most rugged environment.